Showing posts with label shooting techniques. Show all posts
Showing posts with label shooting techniques. Show all posts
Shooting Star Trails
Shooting Star Trails:
Star trails is the topmost in my list of the "things to do before I ____ ". I had tried it couple of times and have got satisfactory results so far. Here I will share the technique for the same. I am in fond of the long exposure night shots now.
Along with the camera you will need shutter release cable (or any other mechanism to lock the shutter button of the camera) and tripod. Few people know my running around for the cable release :-))
Preparation:
Fully charged batteries, google around to locate the polaris star if you want the circulat trails. Study your camera manual well.
Time:
Off course night time, when the moon light is minimum i.e. less than 15% moon phase.
Place:
Sneak out the city chaos and find out the place with the minimum amount of the light pollution. Also please make sure that tripods are allowed at the place. I found real difficulties in using the tripod during my shoot at Raigad.
Frame composition:
Compose the frame in mind. Circular or diagonal trails. The foreground object in the star trails adds another dimension to the image. Consider the strong foreground object. But at the same time be sure that it doesn't overlap with the actual trails you get. Also placing this object in the frame plays important role. For the circular trails, I consider keeping the centre at the third and a foreground object at the centre of the trails.
Actual Shoot:
There are two ways to shoot the star trails. One is the to use the BULB mode of the camera. Place your camera on “bulb” mode and expose for a long enough period of time so that the stars streak through the sky as the Earth rotates. Probably this was the best technique for the films. But exposing the digiSLR sensors for such a long period heatens up the sensor, which is the heart of the camera. Also if there is even slightly illuminated object or a stray light in the frame, there are more chances of the overexposure in the final image. Also if the in-camera noise reduction mechanism is turned on, camera will take the time of equal amount of the exposure time to process the image within itself. And consider the case if in the middle of the exposure time your battery is drained out. Probably this would be the most frustrating case. Most modern digital SLRs have built in long exposure noise reduction by silently taking second “dark frame” for the same length of the first, thus removing the dark current. One of the major problems with the built in noise reduction is that in order to be effective, the camera has to noise reduce under the same ambient temperature as the original exposure(meaning the photographer has to stay on location for twice the amount of time), the other problem is battery life limitations.
The other solution is the one which I followed and almost turned out to be perfect for me, and that too at a maximum ease.So instead of shooting a single long exposure, we can take a large number of short exposures equaling the length of time that our single long exposure would have been and “stack” them together. In this case we turn of the in-camera noise reduction and shoot multiple images. The noise reduction will be done by processing with few black frames manually. Here are the actual steps:
1) Set your quality to .jpg-fine (I know, you want to shoot raw, but trust me, this will save you a lot of batch processing in the future).
2) Turn off any kind of long-exposure noise reduction that is built in to your camera.
3) On a tripod, compose your shot and set your shutter speed to the slowest speed your camera will shoot continuously, most digital SLRs will shoot as slow as 30 seconds, don’t use bulb. Shoot few test shots for the sky, just to check the camera settings for the sky and stars. Within couple of shots you will get the fair idea about the settings.
4) Hold on. You need to shoot a manual dark frame for noise reduction. Keep the camera on the final settings decided. Put your lens cap on, make sure the viewfinder doesn’t have any light shining into it and expose for 30 seconds. In practical around 10 balck frame are enough.
5) Once balck frames are done, remove the lens cap.
6) Shoot a brighter foreground frame for the detail in the foreground. Put your camera on bulb, and make an exposure long enough to get good detail in the foreground, don’t worry about overexposing the sky. Use the same aperture and ISO setting as the 30 second exposures for noise consistency.
7) Now actual go for star trails. Don’t worry about getting too much foreground detail in your exposure right now, just focus on the stars.
8) Set your camera to continuous drive mode.
9) Lock your cable release/remote so that the camera is stuck firing continuously. Now the camera will shoot one 30 second exposure after another until you stop it.
8) Stop after an hour (or however long your predetermined exposure is). The longer you let the camera shoot, the more the earth will rotate and the longer the star streaks. Also, keep an eye on the camera as some cameras do not have the buffer to handle so many shots in a row. You can even continue till your battery is exhausted.
Post Proccessing:
Method-1:
1) Download StarTrails from HERE. We will also be using Adobe Photoshop CS3 (although you can probably use CS2 or even Elements 6).
2) Prerequisite for the startrails application is .NET framework.
Open StarTrails and go to File –> “Open Images” and select all of the frames except for the dark frame and foreground frame.
3) Go to File —> “Open Dark Frames” and select your darkframe
4) Click Build —> Star Trails and give it a few minutes. You can watch as the star streaks grow.
5) Save as a .tiff file and open the .tiff in Photoshop
6) Also open the foreground exposure jpeg and paste it as a new layer on top of your stacked .tiff file in photoshop
7) Create a black mask on the foreground layer and paint in the foreground carefully.
8) Apply curves, noise reduction and other editing adjustments and your done!
Method-2: (I haven't tried this, poor at PS and This is time consuming and tedious).
File —> Scripts —> “Load Files into Stack.” Open all of your exposures except the foreground frame. Change each layer’s blending type to “lighten” and the dark frame’s to “difference.”
Cheers.
Do post the results. And yess, a gala treat due after you get the trails...!!!
Star trails is the topmost in my list of the "things to do before I ____ ". I had tried it couple of times and have got satisfactory results so far. Here I will share the technique for the same. I am in fond of the long exposure night shots now.
Along with the camera you will need shutter release cable (or any other mechanism to lock the shutter button of the camera) and tripod. Few people know my running around for the cable release :-))
Preparation:
Fully charged batteries, google around to locate the polaris star if you want the circulat trails. Study your camera manual well.
Time:
Off course night time, when the moon light is minimum i.e. less than 15% moon phase.
Place:
Sneak out the city chaos and find out the place with the minimum amount of the light pollution. Also please make sure that tripods are allowed at the place. I found real difficulties in using the tripod during my shoot at Raigad.
Frame composition:
Compose the frame in mind. Circular or diagonal trails. The foreground object in the star trails adds another dimension to the image. Consider the strong foreground object. But at the same time be sure that it doesn't overlap with the actual trails you get. Also placing this object in the frame plays important role. For the circular trails, I consider keeping the centre at the third and a foreground object at the centre of the trails.
Actual Shoot:
There are two ways to shoot the star trails. One is the to use the BULB mode of the camera. Place your camera on “bulb” mode and expose for a long enough period of time so that the stars streak through the sky as the Earth rotates. Probably this was the best technique for the films. But exposing the digiSLR sensors for such a long period heatens up the sensor, which is the heart of the camera. Also if there is even slightly illuminated object or a stray light in the frame, there are more chances of the overexposure in the final image. Also if the in-camera noise reduction mechanism is turned on, camera will take the time of equal amount of the exposure time to process the image within itself. And consider the case if in the middle of the exposure time your battery is drained out. Probably this would be the most frustrating case. Most modern digital SLRs have built in long exposure noise reduction by silently taking second “dark frame” for the same length of the first, thus removing the dark current. One of the major problems with the built in noise reduction is that in order to be effective, the camera has to noise reduce under the same ambient temperature as the original exposure(meaning the photographer has to stay on location for twice the amount of time), the other problem is battery life limitations.
The other solution is the one which I followed and almost turned out to be perfect for me, and that too at a maximum ease.So instead of shooting a single long exposure, we can take a large number of short exposures equaling the length of time that our single long exposure would have been and “stack” them together. In this case we turn of the in-camera noise reduction and shoot multiple images. The noise reduction will be done by processing with few black frames manually. Here are the actual steps:
1) Set your quality to .jpg-fine (I know, you want to shoot raw, but trust me, this will save you a lot of batch processing in the future).
2) Turn off any kind of long-exposure noise reduction that is built in to your camera.
3) On a tripod, compose your shot and set your shutter speed to the slowest speed your camera will shoot continuously, most digital SLRs will shoot as slow as 30 seconds, don’t use bulb. Shoot few test shots for the sky, just to check the camera settings for the sky and stars. Within couple of shots you will get the fair idea about the settings.
4) Hold on. You need to shoot a manual dark frame for noise reduction. Keep the camera on the final settings decided. Put your lens cap on, make sure the viewfinder doesn’t have any light shining into it and expose for 30 seconds. In practical around 10 balck frame are enough.
5) Once balck frames are done, remove the lens cap.
6) Shoot a brighter foreground frame for the detail in the foreground. Put your camera on bulb, and make an exposure long enough to get good detail in the foreground, don’t worry about overexposing the sky. Use the same aperture and ISO setting as the 30 second exposures for noise consistency.
7) Now actual go for star trails. Don’t worry about getting too much foreground detail in your exposure right now, just focus on the stars.
8) Set your camera to continuous drive mode.
9) Lock your cable release/remote so that the camera is stuck firing continuously. Now the camera will shoot one 30 second exposure after another until you stop it.
8) Stop after an hour (or however long your predetermined exposure is). The longer you let the camera shoot, the more the earth will rotate and the longer the star streaks. Also, keep an eye on the camera as some cameras do not have the buffer to handle so many shots in a row. You can even continue till your battery is exhausted.
Post Proccessing:
Method-1:
1) Download StarTrails from HERE. We will also be using Adobe Photoshop CS3 (although you can probably use CS2 or even Elements 6).
2) Prerequisite for the startrails application is .NET framework.
Open StarTrails and go to File –> “Open Images” and select all of the frames except for the dark frame and foreground frame.
3) Go to File —> “Open Dark Frames” and select your darkframe
4) Click Build —> Star Trails and give it a few minutes. You can watch as the star streaks grow.
5) Save as a .tiff file and open the .tiff in Photoshop
6) Also open the foreground exposure jpeg and paste it as a new layer on top of your stacked .tiff file in photoshop
7) Create a black mask on the foreground layer and paint in the foreground carefully.
8) Apply curves, noise reduction and other editing adjustments and your done!
Method-2: (I haven't tried this, poor at PS and This is time consuming and tedious).
File —> Scripts —> “Load Files into Stack.” Open all of your exposures except the foreground frame. Change each layer’s blending type to “lighten” and the dark frame’s to “difference.”
Cheers.
Do post the results. And yess, a gala treat due after you get the trails...!!!
21:58
Shooting waterdrops.
This technique was shared on Photographers@Pune discussion thread. Reposting here.
Equipment:
-Canon 40D body.
-Sigma 70-300 APO DG (Poor man's tele+macro lens).
-In camera flash.
-Shutter release cable.
-Glass (Preferably with some tangy colors, mine was lemon green Luminarc).
-Water :-)
-Dropper (I used empty ballpen, time par dropper gayab ho gaya tha).
-Tripod.
-Light source was CFL bulb in the room + Camera flash.
The camera settings I chose..
Shutter Speed: 1/60
Aperture: f/5
Focal Length: 190mm.
ISO: 400 (low light conditions)
Shoot:
Put the camera on high speed continous shooting mode. Set up the tripod only slightly (approx 6") elevated above the surface of the glass. Fill it with water to the top edge, and get the camera ready on tripod. Switch the camera to manual focus. Compose the frame. Hold the tip of the pen at the centre of the top plane of the glass filled with water just about where you'd be dropping the water drops and focus the camera on it, locking the focus in place. You will need a helping hand to hold the pen, while you are focussing. Now, setup is ready.
Stand near the glass. Make sure that you are not in frame. Hold shutter release cable in one hand (mine is 5mtr long). Now press the shutter release and lock it and quickly start dropping the water using the dropper as close as you can to the place where you had hold the pen tip while focussing. It's takes lots of practice and MANY trials, so don't forget your patience for this. You will end up getting only 5-6 well timed shots after say around 100 clicks. You will eventually get the hang of when to press the shutter in relation to dropping the water, and I'm sure you'll come out with some great shots.
Most of all, experiment! Try different different angles and lighting setups. Good luck P@P!
Cheers.
Do post the results. And yess, a one more gala treat due after you get the shots...!!!
03:08
Shooting a illusion of colorful smoke

First of all I have tried this as a fun and not that much expert in this form.
When you are held in the homes during long weekends, there is no other choice than the indoor shoot. And playing with the smoke and light is fun to do.
Preparation: Firstly you need to get bored inside your homes :-)
open the doors of orthodox mind and be ready for the post processing do create unreal effects and illusions.
Equipment:
Smoke sticks (dhoop kaadi), usually are around 1cm thick and 3-4cm long. Or also can get in the form of crystals to be burnt on charcoal. You will easily get these in Pooja items shops.
Black background: black sheet or cloth.
Your sharpest lens (i preferred 50mm) and camera.
Actual shoot:
Arrange the black sheet along the perpendicular surfaces. Put down window curtains in a day time. Or light a small lamp during night, just to walk around the room. Place smote stick in a plate or bowl in front of the arrangement. Be sure that you safeguard the valuable flooring, table top from the burning stick.
Select camera position and aperture settings so as to get the DoF of 4-5 inches. Light the stick and observe the smoke patterns. Focus manually on the stick or the thickest smoke position. Now open on-camera flash and start clicking. Optionally external flash can be used. Actual frames will have white smoke on a black background. Shoot considerable number of frames. Blow slightly on the smoke to get few interesting patterns.
On computer:
Open the shots and select one with the most interesting patterns. Open copy of this in photo editing software.
Feel free to crop/rotate/mirror images for more interest.
Invert the colors of the image. This will make the actual smoke black or gray and background turns white.
Now play with the exposure, contrast and brightness so that background becomes perfect white and smoke is seen prominently without loosing the details in patterns.
Now play with the color balance of RGB-CMY to the extremities as per your wish such that colors of smoke change dramatically. This way one can almost create the illusion of every single color in the universe. Stretch you imagination to shoot different interesting figures in smoke patterns. Even with more time spent in processing and adjusting color balance for different areas in the frame, one can have all colors in the frame.

Do enjoy such homely shoots and treat me if your family members remain happy for you spending weekend at home.
And yes,Do not forget to share the wonderful pics here.
02:30
Shooting Star Trails
Star trails is the topmost in my list of the "things to do before I ____ ". I had tried it couple of times and have got satisfactory results so far. Here I will share the technique for the same. I am in fond of the long exposure night shots now.

Along with the camera you will need shutter release cable (or any other mechanism to lock the shutter button of the camera) and tripod. Few people know my running around for the cable release :-))
Preparation:
Fully charged batteries, google around to locate the polaris star if you want the circulat trails. Study your camera manual well.
Time:
Off course night time, when the moon light is minimum i.e. less than 15% moon phase.
Place:
Sneak out the city chaos and find out the place with the minimum amount of the light pollution. Also please make sure that tripods are allowed at the place. I found real difficulties in using the tripod during my shoot at Raigad.
Frame composition:
Compose the frame in mind. Circular or diagonal trails. The foreground object in the star trails adds another dimension to the image. Consider the strong foreground object. But at the same time be sure that it doesn't overlap with the actual trails you get. Also placing this object in the frame plays important role. For the circular trails, I consider keeping the centre at the third and a foreground object at the centre of the trails.
Actual Shoot:
There are two ways to shoot the star trails. One is the to use the BULB mode of the camera. Place your camera on “bulb” mode and expose for a long enough period of time so that the stars streak through the sky as the Earth rotates. Probably this was the best technique for the films. But exposing the digiSLR sensors for such a long period heatens up the sensor, which is the heart of the camera. Also if there is even slightly illuminated object or a stray light in the frame, there are more chances of the overexposure in the final image. Also if the in-camera noise reduction mechanism is turned on, camera will take the time of equal amount of the exposure time to process the image within itself. And consider the case if in the middle of the exposure time your battery is drained out. Probably this would be the most frustrating case. Most modern digital SLRs have built in long exposure noise reduction by silently taking second “dark frame” for the same length of the first, thus removing the dark current. One of the major problems with the built in noise reduction is that in order to be effective, the camera has to noise reduce under the same ambient temperature as the original exposure(meaning the photographer has to stay on location for twice the amount of time), the other problem is battery life limitations.
The other solution is the one which I followed and almost turned out to be perfect for me, and that too at a maximum ease.So instead of shooting a single long exposure, we can take a large number of short exposures equaling the length of time that our single long exposure would have been and “stack” them together. In this case we turn of the in-camera noise reduction and shoot multiple images. The noise reduction will be done by processing with few black frames manually. Here are the actual steps:
1) Set your quality to .jpg-fine (I know, you want to shoot raw, but trust me, this will save you a lot of batch processing in the future).
2) Turn off any kind of long-exposure noise reduction that is built in to your camera.
3) On a tripod, compose your shot and set your shutter speed to the slowest speed your camera will shoot continuously, most digital SLRs will shoot as slow as 30 seconds, don’t use bulb. Shoot few test shots for the sky, just to check the camera settings for the sky and stars. Within couple of shots you will get the fair idea about the settings.
4) Hold on. You need to shoot a manual dark frame for noise reduction. Keep the camera on the final settings decided. Put your lens cap on, make sure the viewfinder doesn’t have any light shining into it and expose for 30 seconds. In practical around 10 balck frame are enough.
5) Once balck frames are done, remove the lens cap.
6) Shoot a brighter foreground frame for the detail in the foreground. Put your camera on bulb, and make an exposure long enough to get good detail in the foreground, don’t worry about overexposing the sky. Use the same aperture and ISO setting as the 30 second exposures for noise consistency.
7) Now actual go for star trails. Don’t worry about getting too much foreground detail in your exposure right now, just focus on the stars.
8) Set your camera to continuous drive mode.
9) Lock your cable release/remote so that the camera is stuck firing continuously. Now the camera will shoot one 30 second exposure after another until you stop it.
8) Stop after an hour (or however long your predetermined exposure is). The longer you let the camera shoot, the more the earth will rotate and the longer the star streaks. Also, keep an eye on the camera as some cameras do not have the buffer to handle so many shots in a row. You can even continue till your battery is exhausted.
Post Proccessing:
Method-1:
1) Download StarTrails from HERE. We will also be using Adobe Photoshop CS3 (although you can probably use CS2 or even Elements 6).
2) Prerequisite for the startrails application is .NET framework.
Open StarTrails and go to File –> “Open Images” and select all of the frames except for the dark frame and foreground frame.
3) Go to File —> “Open Dark Frames” and select your darkframe
4) Click Build —> Star Trails and give it a few minutes. You can watch as the star streaks grow.
5) Save as a .tiff file and open the .tiff in Photoshop
6) Also open the foreground exposure jpeg and paste it as a new layer on top of your stacked .tiff file in photoshop
7) Create a black mask on the foreground layer and paint in the foreground carefully.
8) Apply curves, noise reduction and other editing adjustments and your done!
Method-2: (I haven't tried this, poor at PS and This is time consuming and tedious).
File —> Scripts —> “Load Files into Stack.” Open all of your exposures except the foreground frame. Change each layer’s blending type to “lighten” and the dark frame’s to “difference.”
Cheers.
Do post the results. And yess, a gala treat due after you get the trails...!!!
Along with the camera you will need shutter release cable (or any other mechanism to lock the shutter button of the camera) and tripod. Few people know my running around for the cable release :-))
Preparation:
Fully charged batteries, google around to locate the polaris star if you want the circulat trails. Study your camera manual well.
Time:
Off course night time, when the moon light is minimum i.e. less than 15% moon phase.
Place:
Sneak out the city chaos and find out the place with the minimum amount of the light pollution. Also please make sure that tripods are allowed at the place. I found real difficulties in using the tripod during my shoot at Raigad.
Frame composition:
Compose the frame in mind. Circular or diagonal trails. The foreground object in the star trails adds another dimension to the image. Consider the strong foreground object. But at the same time be sure that it doesn't overlap with the actual trails you get. Also placing this object in the frame plays important role. For the circular trails, I consider keeping the centre at the third and a foreground object at the centre of the trails.
Actual Shoot:
There are two ways to shoot the star trails. One is the to use the BULB mode of the camera. Place your camera on “bulb” mode and expose for a long enough period of time so that the stars streak through the sky as the Earth rotates. Probably this was the best technique for the films. But exposing the digiSLR sensors for such a long period heatens up the sensor, which is the heart of the camera. Also if there is even slightly illuminated object or a stray light in the frame, there are more chances of the overexposure in the final image. Also if the in-camera noise reduction mechanism is turned on, camera will take the time of equal amount of the exposure time to process the image within itself. And consider the case if in the middle of the exposure time your battery is drained out. Probably this would be the most frustrating case. Most modern digital SLRs have built in long exposure noise reduction by silently taking second “dark frame” for the same length of the first, thus removing the dark current. One of the major problems with the built in noise reduction is that in order to be effective, the camera has to noise reduce under the same ambient temperature as the original exposure(meaning the photographer has to stay on location for twice the amount of time), the other problem is battery life limitations.
The other solution is the one which I followed and almost turned out to be perfect for me, and that too at a maximum ease.So instead of shooting a single long exposure, we can take a large number of short exposures equaling the length of time that our single long exposure would have been and “stack” them together. In this case we turn of the in-camera noise reduction and shoot multiple images. The noise reduction will be done by processing with few black frames manually. Here are the actual steps:
1) Set your quality to .jpg-fine (I know, you want to shoot raw, but trust me, this will save you a lot of batch processing in the future).
2) Turn off any kind of long-exposure noise reduction that is built in to your camera.
3) On a tripod, compose your shot and set your shutter speed to the slowest speed your camera will shoot continuously, most digital SLRs will shoot as slow as 30 seconds, don’t use bulb. Shoot few test shots for the sky, just to check the camera settings for the sky and stars. Within couple of shots you will get the fair idea about the settings.
4) Hold on. You need to shoot a manual dark frame for noise reduction. Keep the camera on the final settings decided. Put your lens cap on, make sure the viewfinder doesn’t have any light shining into it and expose for 30 seconds. In practical around 10 balck frame are enough.
5) Once balck frames are done, remove the lens cap.
6) Shoot a brighter foreground frame for the detail in the foreground. Put your camera on bulb, and make an exposure long enough to get good detail in the foreground, don’t worry about overexposing the sky. Use the same aperture and ISO setting as the 30 second exposures for noise consistency.
7) Now actual go for star trails. Don’t worry about getting too much foreground detail in your exposure right now, just focus on the stars.
8) Set your camera to continuous drive mode.
9) Lock your cable release/remote so that the camera is stuck firing continuously. Now the camera will shoot one 30 second exposure after another until you stop it.
8) Stop after an hour (or however long your predetermined exposure is). The longer you let the camera shoot, the more the earth will rotate and the longer the star streaks. Also, keep an eye on the camera as some cameras do not have the buffer to handle so many shots in a row. You can even continue till your battery is exhausted.
Post Proccessing:
Method-1:
1) Download StarTrails from HERE. We will also be using Adobe Photoshop CS3 (although you can probably use CS2 or even Elements 6).
2) Prerequisite for the startrails application is .NET framework.
Open StarTrails and go to File –> “Open Images” and select all of the frames except for the dark frame and foreground frame.
3) Go to File —> “Open Dark Frames” and select your darkframe
4) Click Build —> Star Trails and give it a few minutes. You can watch as the star streaks grow.
5) Save as a .tiff file and open the .tiff in Photoshop
6) Also open the foreground exposure jpeg and paste it as a new layer on top of your stacked .tiff file in photoshop
7) Create a black mask on the foreground layer and paint in the foreground carefully.
8) Apply curves, noise reduction and other editing adjustments and your done!
Method-2: (I haven't tried this, poor at PS and This is time consuming and tedious).
File —> Scripts —> “Load Files into Stack.” Open all of your exposures except the foreground frame. Change each layer’s blending type to “lighten” and the dark frame’s to “difference.”
Cheers.
Do post the results. And yess, a gala treat due after you get the trails...!!!
03:08
Subscribe to:
Posts (Atom)




